Setting up screen passwords for GOT2000
See below the 1st of many technical tips we shall be posting over the coming months.
- Go to: Common > GOT Environmental setting > Security
- Click on: Level
- Set Security Level Device: for example ‘D100’ Register
- Set Security Level Password: You can set multiple passwords for hierarchy of access
In this example the password is ‘1234’. Once these are filled click on ‘APPLY and OK’
The next stage is to apply a security level to a specific screen(s) accordingly.
In this example base screen 2 is set to level security 1 therefore a keypad will be prompt as soon
as you try to access screen 2. You can access these settings in screen property.
Important Information
When the GOT HMI screen is running and you have entered the password in the prompt keypad the password will remain in the set data register until it has been reset. A suitable way to reset the data register is to use a switch to reset the data register or use a switch to go back to main screen (screen1) and also to reset the data register as the same time.
Example: Switch for screen switch and changing D100 back to ‘0’
Once this menu is completed click ‘OK’. Your password screen has now been completed.
Click here to download full PDF.
More technical tips coming soon!